Hola, prueba esto:
si usas DJGPP
_doserrno = 0;
fprintf (stdprn, "Hello, world!rnf");
if (_doserrno == 0x1c)
fprintf (stderr, "The printer is out of paper!n");
Ahora si buscas algo más avanzado...
bios printer
Syntax
#include '<'bios.h'>'
unsigned _bios_printer(unsigned cmd, unsigned printer, unsigned data);
Description
The bios printer routine uses INT 0x17 to perform printer output services for parallel
printers. The printer argument speci es the a
ected printer, where 0 is LPT1, 1 is LPT2,
and so on. The cmd argument can be any of the following manifest constants:
_PRINTER_INIT
Reset and initialize the specified printer port
_PRINTER_STATUS
Return the status of the speci ed printer port
_PRINTER_WRITE
Print the data argument to the speci ed printer port
Return Value
The bios printer function returns the value in the AX register after the BIOS interrupt.
The high-order byte (AH) of the return value indicates the printer status after the operation,
as de ned below:
Bit Meaning if True
0 Printer timed out
1 Not used
2 Not used
3 I/O error
4 Printer selected
5 Out of paper
6 Acknowledge
7 Printer not busy
Alphabetical List 27
Portability
not ANSI, not POSIX
Example
while (*c)
_bios_printer(_PRINTER_WRITE, *c++, 0);
Y si todavia quieres más avanzado... tal vez c no sea una buena alternativa, porque tienes 2 opciones:
1-elaborar tu propio driver solicitando la informacion necesaria al fabricante.
2-buscar a ver si de alguna forma por medio de la api de windows puedes cargar la impresora actual, o enviarle parametros....esta me suena más factible, y por mucho.
suerte
juank
